TAG Minute- Headlights! I know that you have noticed how your headlights do not stay clear and bright- especially as your car gets older. Check out this brief episode where Steve shows you how to clean up those headlights, keeping them clear and making your night illumination brighter. And, it helps keeping your car look great. It’s simpler than you would think!
Posts
Steve shows how to inspect your brakes- even without touching the car! Whether you fix it yourself or have someone else, you can still know how to determine the condition of your brakes.
Spring time is time to plant the garden! Steve gets the ground prepared.
On The American Garage, Steve explains tire sizes. If you are thinking about changing the size of your tires or wheels, the fit on your car is very important. Not all wheels and tires work together, and if your car is slightly exotic, you may have limited options.
Well, we had a car project sneak up on us and require our attention at The American Garage, and we jumped in with both feet. There were so many oil leaks on the car, that it couldn’t leak more unless I left the drain-plug out. This caused a whole course of actions to ensue which included replacing the timing belt, water pump, and replacing a LOT of seals on the engine. Jump in with us as Steve takes us through the repairs. Part 1 of 2.
I know I am posting this as a minute episode, and it is regular length- but here is the conclusion of the car repairs that we started in the last post. I know it is a daunting thing to dig into your primary transportation like this- and that many will not do so. But the rewards- and the trials- of a task like this have really helped me to become more able to identify problems, solve problems, and the victory of the successful completion has positively impacted my budget and allowed me to understand what I am really capable of. Perhaps by challenging and pushing the limits of what I know and what I can do, I have found more capability then I would have thought possible. And now that the car is taken care of, we can get back to the fun projects we have in store! Feel free to ask questions and add your comments-
Steve takes a minute to show how to understand the importance of disconnecting the ground to a battery before working on a car.
This episode is all about learning to use a tablesaw properly. This is an hour long demonstration, and goes into depth with ripping, crosscutting, adjusting the saw, changing blades, and of course safety. I injected a little humor into the safety part, so I hope it is not too cheesy. Also, for some reason when the camera went on, I called the miter gauge a square. At least I was consistent- and used the wrong term throughout. Bear with me on that. The demonstration includes the making of a puzzle, which helps to learn the cuts. Here are the plans for you to build your own!
Okay, so I am helping you cheat on the puzzle solution. But hey! If you have built the puzzle, then you need the solution so you can drive your friends crazy. Haven’t built the puzzle yet? I go through all the steps of making the puzzle as I teach you the best ways to use a table saw in the episode How To Use a Table Saw. Go check it out. The idea is to become precise in your sue to a tablesaw- to make your work better, and to help keep you safe by using best practices. Remember, always follow the safety guidelines that come with your power tools! You are responsible for your safety. Enjoy the puzzle solution, and send me your comments!
In this video, Steve show us how to use a jointer. A jointer really has a limited purpose, but that purpose is so important to successful woodworking that every woodworker should know how to use one. Here is a note from Steve-
I learned to use a jointer in high school wood shop, and at first considered it a low priority tool- since I could not afford one in my own shop for the longest time. It was a luxury, and one that I worked without for many years. The end result was when I glued boards together, joints would not always match up. When I made boxes, I had the hardest time getting them to sit flat. My solution was to either 1, ignore it, 2, sand the high spots until it sat flat, or 3- use clamps and pressure to try and bend the boards in place until they dried. These solutions never worked, and sometimes gave disastrous results. Being spoiled as school with a 10 inch jointer with an 8 foot bed, the small ones I saw at the store just did not begin to measure up. When I finally got my own jointer, it is a 6 inch jointer with a 4 foot bed- I realized that the smaller size can still produce very nice results. All of a sudden, I could straighten a board and the project went flawlessly. Risks of kickback diminished because the wood sits flat on the tablesaw. Edges come out straight as an arrow. The headaches I could have saved myself! Anyway, enjoy this episode, and happy woodworking! Be safe and follow all the safety procedures that come with your power tools. Don’t forget your safety glasses!
